Improving farming efficiency with a new 21st-century gate

Newbury Innovation helps develop the Dofygate to help farmers move their land more quickly

Improving farming efficiency with a new 21st-century gate

Improvements in efficiency and productivity are a recurring theme across many sectors and farmers are not immune from increasing pressure on their time and the demands on the bottom line.

All of them at some time will have experienced the frustration of having to stop their vehicle, get out, open a gate, return to the vehicle, drive through, park, return to the gate to close it and then continue on their way.

As well as being a tedious process, there is a risk that livestock may escape while the gate is open and the farmer is in his vehicle.

Jim Alston, a Norfolk-based farmer, had been frustrated by this process for some time and initially came up with the idea of an electrified, flexible grid installed at the field entrance.

However, after initial trials this approach was abandoned and Mr Alston returned to the idea of improving the functionality and capability of the farm gate.

Working with colleague, Oliver Chastney, an expert in 3D computer-aided design and engineering design, the pair explored various gate and barrier options, finally settling on a gate that could close within five seconds, moved within an animal’s field of vision, could operate on a standalone basis and was robust enough to cope with knocks from passing farm vehicles or lively farm stock.

Finally, it had to be remotely controlled.

Having been disappointed by a previous supplier, the Dofygate (driver operated field and yard gate) team searched the internet for an alternative solution and, in 2013, came across, Newbury Innovation, which, after a series of face-to-face meetings and quotes for different elements of the work, was appointed.

Newbury Innovation director Jon Hawkins said: “We were able to help Jim define the spec for this complex piece of electronics and were then able to develop the board that, ultimately, is the ‘brains’ inside the gate.”

One of the challenges was being able to generate a shock that was suitable for the control of the stock, but at a very low power consumption.

The solution was an energiser – ie a component within the gate that provides the electric shock that acts as the deterrent for the livestock.

The functioning of the energiser was just one of the elements that had be incorporated on to the printed circuit board (PCB).

Newbury Innovation also engineered it so that the energiser had sufficient sensitivity to only emit the higher shocks to livestock and would not discharge unless the contact between the gate and the ground was at a specified level, avoiding unnecessary shock cycles.

Mr Hawkins said: “Voltage tracking on the surface of the PCB was challenging.

“With the higher voltage being discharged there was every likelihood that it would jump the air gaps between the different circuits.

“The final board has circuits arranged in a unique format of width, shape and spacing that was determined following a robust testing procedure.”

Powering the energiser was one of the main challenges as those already on the market were designed to power long fences more than a kilometre in length and if that energy was on a 3m gate the shock would be too strong.

Mr Hawkins said: “If an animal were to receive too high a shock they would become scared not only of the gate, but also that entire area of the field, which would be a real problem when you came to move the livestock to a different area of the farm.”

While solar power had been deemed unsuitable on a stand-alone basis, it became clear after talking with Newbury Electronics that, when used with a technique called detection/response, it would be the solution they had been seeking.

The Dofygate operates on around 0.5mA, in contrast to a typical energiser that would use in the region of 20mA.

The gate maintains a relatively low voltage of 100v until it detects something is touching and this then triggers the energise into putting out three much higher voltage bursts, each of around 4000v, which is a sufficient deterrent for the stock.

The final element was the design and production of the remote-control function, which includes a choice of fob, connected buttons or a mobile phone app.

Launched initially to dairy farmers, the gate, with its three key benefits of speed, ease of installation and portability, has been well received across the wider farming community.

Not only that, but gates have also been deployed on construction sites, schools and for traffic control.

Mr Hawkins and his team in Faraday Road are now looking at an updated version of the gate for use with the equine community.

Newbury Innovation is the electronic design and development division of Newbury Electronics.

The company offers a complete electronic design service.

Leave your comment

Share your opinions on Newbury Weekly News

Characters left: 1000


Nokia relocates 250 staff to its new offices at Theale

Nokia relocates 250 staff to its new offices at Theale

Communications giant opens 'flagship facility' and moves employees from Newbury

David and Jo Acheson, of Liberty Garden Buildings

Building a firm with a shedload of determination

Liberty Garden Buildings owners have ambitious targets


Planning and design firm appoints new directors


Improving farming efficiency with a new 21st-century gate


Top franchisees award